Questions & Answers for: towel bar removal

Question about 24 In. Towel Bar...

1 Answer

...towel bar from the wall? My contractor installed a 24" Rockland towel bar. I now want to remove it so that I can paint the wall. I can't find the instructions, and I can't remove the towel bar. Any ...

Ad

Question about YB2818 Eva Towel Bar Bathroom Accessory - Brushed Nickel

2 Answers

...towel bar wall mounted bracket I have a loose Moen Eva towel bar on the wall involving one of the two mounting brackets. I do not know if there is a male/female bracket portion inside the towel bar ...

Ad

...towel bar is coming off of the wall and I need to tighten it to the wall. How do I do this? Towel bars usually have a base that attaches to the wall with a screw. To expose the screw, you must loosen ...

Question about YB2218CH Brantford 18'' Towel Bar In Chrome

2 Answers

...towel bar is loose. How do I remove My Brantford towel bar is loose. How do I remove from the mounting posts to tighten? There are some tiny screws under the posts. Loosen them and lift the post off ...

How to remove towel bars and hooks from wall. No set screw visible. We did not install them. Newer towel bars don't have set screws... Solution-slide off! There is an opening in the bottom of the ...

Question about 24 In. Towel Bar...

1 Answer

...towel bar to paint my bathroom. Is there a special tool needed to remove it? Please help. First off you need to pry off the cap thats facing you (most models). Then there should be a little hole on ...

Question about 24 In. Towel Bar...

1 Answer

...towel bar to the wall mounts. You will need to loosen each of these to remove the towel bar from the wall and to release the mounting bracket which has pulled free. To repair you need to puchase a ...

Question about YB8086 Mason Towel Ring Bathroom Accessory Chrome

1 Answer

...towel bar. It has a tab under the bottom but I dont know what to do There should be a "set-screw" (a very small screw) at the bottom of base (fat part) of the towel bar. It screws in to hold the fat ...

Question about 24 In. Towel Bar...

1 Answer

...towel bar that does not have a set screw on the flange cover? I think you grab hold of the rosette closest to the wall and spin it off, it should expose the set screw. If that isn't it, one of those ...

Question about 24 In. Towel Bar...

2 Answers

...towel bar, towel ring, and toilet paper ring from the Moen Eva collection? Using a flat-head screwdriver to "pop" it off doesn't work. for most towel bar and bath accessories there is a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...