Questions & Answers for: torque spindle nut cv joint

Question about 2004 Tacoma

1 Answer

...don't tighten the 4 lower ball joint set bolts. torque is as follows: ball joint to control arm- 112 ft-lbs Tie rod nut- 67 ft-lbs lower ball joint set bolts- 83 ft-lbs remember to use a new cotter ...

Ad

...spindle with the holes in it into the strut and insert the bolts and nuts. Tighten them securely. Torque the large retaining nut to 200 foot pounds. Repeat the same procedure to the other side. Put ...

Ad

Question about 2006 Grand Caravan

1 Answer

...spindle to the grooves in the steering knuckle. Do not force this connection. Rotate the axle by hand until the splines align properly to the groove. Reconnect the remaining components by reversing ...

Question about 1994 Escort

1 Answer

spindle enough to get the large nut on. Put the large nut on a couple of turns. Put the nut back on the lower ball joint but do not tighten it yet. 0Push the spindle back into the lower mounting point

Question about 1994 Escort

1 Answer

...torque specification for the axle spindle nut that connects the cv joint to the wheel hub. hi the torque settings for the hub nuts are 236-318 Nm these are the drive shaft nuts that fit on the end of ...

...spindle. Push the wheel hub all the way onto the shaft spline to seat and torque down the CV nut tight. With a flat head screwdriver tap the lip of the new CV nut into the groove cut into the screw ...

Question about 1993 90

1 Answer

...spindle bolt. If anyone also has the torque-specs for the lower ball-joint bolts that would be great too. Thanks! Axle shaft bolt should be torqued to 147 Ft Lbs plus 1/4 turn. The six CV joint bolts ...

...spindle. then pull half shaft out of the transaxle(transmission). be aware you will lose some trans fluid that you will have to replace. install new half shaft and re assemble in reverse order. the ...

...spindle, push the outer CV stub in from the hub, then remove the inner CV stub from the transmission. The inner has a circlip that will hold it in, you will need to get a prybar behind the flange and ...

...Spindle Nut Torque Specification 1A Auto https://docs.1aauto.com > BHA53102 Torque S... PDF Toyota. 4Runner. 1996-02 4 Wheel Drive. Front. 174. 236. Toyota. Sequoia ... Tacoma. 2001-04 4 Wheel Drive. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...