Question about 1997 F150 Regular Cab
...torque specs and schematic drawings and pictures. A weekend job for a novice, day for an expert. Good luck and post your results. I have 1997 ford f150 it over heats and it blows water in the over ...
...torque specs I really need the torque spec's for the bolt's holding the big end cap on the conrod Torque sequence: Step 1: Torque 29 to 34 Ft/Lbs Step 2: Torque an additional 90 to 120 degrees copy ...
I need the torque specs for a 1984 Ford F-150 go to Auto Zone for the specs
torque specs What are the torque specs for rod bearings on a 1997 ford f150?? hi, Main Bearing Cap Bolts 75-85 56-62 Connecting Rod Cap Nuts 31-39 23-28
torque specs for a ford 300 inline 6 i need the torque specs for a 1987 ford 300 inline 6 cyl flywheel and pressure plate Tighten all bolts to 10 Lbs, then 20 Lbs, then 35 Lbs. That should be fine for
1997 ford f150 4.6 4 wheel drive torque spec for heads from autozone.com: Tighten the cylinder head bolts in the sequence shown in three steps, as follows: Step 1-27-31 ft. lbs. (37-43 Nm). Step ...
...torque specs, ball joint, and bushing bolts The torgue spec for the upper control and ball joints is40 to 45 ft lbs they have castle nuts and cotter pins its not that critical the bushing are rubber ...
torque specs intake manifold 97 f150 4.6 stage 1- 4 ft/lbsstage 2- 8 ft/lbs
lug nut torque chart torque specs for 1997 ford f150 for lug nuts on rims wheel nut torque is 100ft lbs.
...don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything got it from ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions