Questions & Answers for: torque spec lower ball joint

...lower ball joints on a 2002 explorer sport the lower ball joints have to be pressed into the lower control arms.The upper ball joints are part of the upper control arm so the upper control arms have ...

Lower ball joint specs: Torque the ball joint-to-control arm nuts/bolts to 85 ft. lbs. (115 Nm). Torque the castellated nut to 108 ft. lbs. (147 Nm). Upper ball joint specs: Tighten the mounting bolts

...for the lower ball joint arm need to know the torque settings for the lower ball joints arm Hi The following torque specs apply : 8 mm Bolt - 55 NM 10 mm Bolt - 85 NM 12 mm Bolt - 115 NM Regards ...

...lower ball joint torque specs 2005 Toyota sequoia Just looking for tightening castle nuts What is theTorque on front ball joints 2005 Toyota sequoia ... ...

...ball joint torque specs 2002 explorer xls 4x4 4.0L v6 gas Need torque specs for upper ball joints. It's a 2002 Explorer XLS 4x4 4.0L V6 gas Douglas, 90 lb-ft is ball joint nut torque. Check the ...

...torque specs for upper ball joints. It's a 2002 Explorer XLS 4x4 4.0L V6 gas Douglas, If upper ball joint is held with castle nut torque is 90 lb-ft. Check the attached links,instruction and guides, ...

lower ball joint torque specs for a 2005 ford explorer 4x4 eddie bauer 4.6l I usually put 2 ugga duggas on them

...torque spec. for lower ball joint wear (For your truck) is 5 in lbs. The official wear spec. to pass the Federal State inspection is less than 1/16" of play at the ball joint (up and down and side to ...

are torqued in two passes. The upper ball joint to 37 Lb Ft on first pass and then final pass torque 90-110 degrees. Lower ball joint 37 Lb Ft and 125-135 degrees. See attached screenshots from manual

...lower control arm): Torque specification: 103 ft-lbs (140 Nm) Ball Joint Castle Nut: Torque specification: 35 ft-lbs (47 Nm) Ball Joint Pinch Bolt: Torque specification: 37 ft-lbs (50 Nm) Please note ...