Questions & Answers for: torque settings rear bearing

Question about 2001 A4

Audi a4 tdi 51 plate

...torque setting they should tell u Rear wheel bearing needs to be adjusted, not simply torque tighten !!! SETTING WHEEL BEARING CLEARANCE : 1. Wheel bearing play is correct when the thrust washer can ...

Question about 2000 Focus

1 Answer

What torque for rear wheel bearing Ford Focus 2000

...torque for rear wheel bearing Ford Focus 2000 Changed wheel cylinder and shoes on rear of Ford Focus 2000 Td di estate (Ghia) 1800 cc. Need to know torque setting for rear wheel bearings. Can only ...

Question about 2000 Focus

2 Answers

1999 ford focus rear wheel

1999 ford focus rear wheel bearing torque setting replaced wheel bearing do not know the torque setting, could you please help. WHEEL BEARING LARGE HUB NUT TORQUE 232 FT LBS. 177 ft lbs

Question about 2000 Focus

1 Answer

Need to know the torque

...torque setting for the rear weel bearing on my 2001 ford focus. it takes a 30mm socket. The torque setting 49 ft. lbs. Torque Specifications DescriptionNmlb-ftlb-in Wheel nuts - steel/alloy ...

Question about 2000 Focus

1 Answer

What are torque specs on 1965 ford 7 and 1/4 inch rear

...rear rebuilt but need torque specs I have a '68 Motor's manual (goes back to'58) the only rear end specs I can find are for the pinion nut (140 ft. lbs.) pinion preload: 17-27 in. lbs. w/integral ...

Question about 2000 Focus

1 Answer

Hi i am looking for torque settings ford mondeo mk3 rear hub? as i am doing a wheel bearing

...looking for torque settings ford mondeo mk3 rear hub? as i am doing a wheel bearing i am looking for torque settings on ford mondeo mk3 rear hub? Hub to lower arm bolt torque: 70Nm Brake caliper ...

Question about 2000 Focus

2 Answers

Peugeot 3008 2012 1.6 H D I. Can someone please confirm torque setting for 36mm nut, when replacing rear discs that have wheel bearing attached?

...torque setting for 36mm nut, when replacing rear discs that have wheel bearing attached? Rear discs are supplied with new wheel bearings and ABS ring attached. Ready to fit them, need torque setting ...

Question about 2000 Focus

1 Answer

What is the size socket required for a 2012 Ford Fusion Axle nut? Also, what is the Torque spec to secure it back on? Working with Front-Right wheel.

Rear-Axle-Nut-Hub-Mount-Lug-Nut-Torque-Spec dannysengineportal.com > wp-content > uploads > S... PDF Front & rear axle nut, hub mount and lug nut torque specifications for FWD ... 3 Series AWD E92

Question about 2000 Focus

1 Answer

Looking for torque setting for rear hub nut

torque setting for rear hub nut 2003 fiat ducato 2.8 jtd Just replaced rear wheel bearing but can't find torque setting for it It's a straight bearing and hub nut is 46mm if it helps thanx I have done

Question about 2000 Focus

2 Answers

Hi looking for torque settings on tata indica rear wheelbearing with collapseable spacer

...torque settings on tata indica rear wheelbearing with collapseable spacer I may be unfamiliar with the torque settings for the rear wheel bearing of a Tata Indica with a collapsible spacer. But on a ...