...if it has a locking torque converter, but that is what it acts like. That once it shifts into overdrive (I count, and it does shift into overdrive), it doesn39;t lock the torque
...TORQUE CONVERTER. I HAVEN39;T USED THE CAR IN OVER A YEAR AND A HALF AND I WANT TO FIX IT. THE LAST TIME I DROVE IT WAS STILL RUNNING. NOW WHEN I TRY TO START THE CAR IT WON39;T STAY RUNNING ...
...torque converter won39;t line up flywheel got 2 bolts in but the other 2 won39;t line up took transmisson out and didn39;t mark it.Are they a certain way it lines up? yes it is balanced and can ...
torque converter before? If not, then it39;s a faulty torque converter too. The torque converter controls the shifting of the vehicle that when it39;s faulty, it stays on a certain gear or won39
...torque converter is surely worn out. The torque converter controls the shifting of the car. If it39;s worn out it may lock on a certain gear or won39;t shift at all. I strongly suggest that you ...
...body issues or torque converter issues,valve body can be changed or rebuilt,torque converter would need to be replaced...i39;d go at valve body cause u can do that without removing the
...suggtes to check fluid level; coudl be torque converter or valve solenoids stuck go to bad. In almost every case a failed reverse engagement means a worn out failed transmission. 45 years of ...
won39;t shift gears won't shift gears Check trans fluid levels, if they are ok, could be a torque converter or vavle solenoid problem. Check for some fault code is stored.
Question about 2001 Eclipse
...2012 . Its ur torque converter , the torque converter engages forward and reverse drive... Sorry to say but u need a transmission rebuild.... I just swapped mine to a 5 speed for around ...
Porsche 911 2000 torque converter won39;t come off engine Tourque converter won't come off engine when I droped transmission. Has to be bolted to flywheel in order to turn
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions