a pilot shaft to alighn clutch assemblely.Possible one will come with new clutch and pressure plate.Reverse assemblely in same order remember to torque all your bolts with torque wrench.Take your time
...torque converter clutch) solenoid is bad, causing improper locking and unlocked of the TC under load causing the engine to stall. It works like putting your hand up to stop a ceiling fan blade. ...
...torque converter is staying locked up which would make it stall when you put it in gear. the torque converter connects your engine to the transmission, and should only lock up (like a releasing the ...
...torque converter - I'm reluctant to pull the snap ring that awaits me because I don't have a diagram as to what it should look like when I pull it all the way apart. ATSG.Com Automatic Transmission ...
Question about 2001 Ranger Regular Cab
...torque converter clutch circuit code and also a p1451 manufacturer specific powertrain code. The solenoids are inside the transmission, if you are getting more than one code you may have a problem ...
Question about 2001 Ranger Regular Cab
torque converter clutch is not dis-engaging. (It locks up the torque converter at highway speeds for fuel efficiency.) Try unplugging the connection at the transmission, and plugging
Torque converter clutch stuck on My 1992 Ford Ranger torque converter clutch is stuck on and I'm wondering, after reading Jeff Turcotte's advice, if I should just disconnect the clutch soleniod or ...
Question about 1997 Ranger SuperCab
...the first time my O/D light started blinking and my truck kept wanting to die. Your shift solenoid or Torque Converter Clutch (most likely) probably needs attention. I'm providing a diagram
Question about 2010 Ranger
...to OD) NO check engine light NO code, New filter and oil ( 2.3 automatic ). Could be TCC solenoid, sticky valves/ valve body, or torque converter. Could be clutch bands also. Needs to be on a
Question about 2010 Ranger
...torque converter in a 2000 Ford ranger 2.5 liter engine The only secret caution... (besides not dropping the whole greasy mess on your head)... To make sure the torque converter is fully and properly ...
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions