Question about 2002 FXD Dyna Super Glide
...harley dyna super glide 50 ft lbs and it is a left is tight nut...don't worry about adjuster nut on clutch just good ole tight will work on that one. compensating nut ( one in front) is 150 ft
...torque specs on clutch for a 85 FLHTC Need the torque specs on replacing the clutch in a 85 flhtc Harley Davidson The torque specs are the same as with any Evolution engine. The compensator sprocket ...
clutch have no torque specs. The manual says to "tighten nuts until releasing disc bottoms on spacers". Torque them like you would any other 1/4" nut, about 10-14 foot pounds. They should be nylock or
...clutch and compensator, the mainshaft nut torques to 60-80 foot pounds of torque LEFT-HANDED. The sprocket shaft nut torques to 150-165 foot pounds. You'll need something to lock the primary chain ...
...torque specs for motor hub nut and clutch hub nut and are these two hub nuts right or left hand thread. Regrettfully, you didn't tell me what year or model bike you're working on. If it's an Evo ...
...clutch hub. Reinstall the primary drive. Apply one line of Loctite 271 inside the mainshaft nut and torque it to 70-80 foot pounds LEFT HANDED. Apply two lines of Loctite 271 (red) to the compensator ...
...torque. The clutch nut has LEFT HANDED THREADS and torques to 60-80 foot pounds. Put one line of Loctite Red #271 in each nut. As long as you don't have to pull the transmission belt pulley off, this ...
...torque the nuts, Custom Chrome 20825,$26. You can then disassemble the clutch and you'll need a press to press the inner clutch hub out of the outer clutch hub. Then compensator sprocket nut ...
...torque. The clutch mainshaft nut (LEFT HANDED THREADS) torques to 60-80 foot pounds. You'll probably need a locking bar or some way to prevent the engine from turning while you torque the nuts. ...
Question about 1979 XLS 1000
...clutch nuts search engine are more efficient. If this isn't to your liking https://taotao.zendesk.com/hc/en-us/articles/204167645-General-Torque-Spec-Settings- try searching "clutch nut torque
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions
