...tray on top much be automatic falling down after the printout. it will not just fall down the black exit tray from your hand your problem will be resolved thank you..Jonathan Datu WE HAD THE ERROR ...
...tray out adn look in top of the printer where the paper feeds out of the tray to see if the is a peice paper is blocking the sensor that reads that the printer has paper. Clean the roller with a ...
Question about LaserJet 2420 Printer
...tray. Hope that helps you. Same problem today STANDARD TOP BIN FULL I dont know what to do ? My email address is [email protected] or [email protected]. please we need your help.... thanks ...
Question about 7210 OfficeJet All-In-One Printer
...top to scan or copy, it does not take it and makes a horrible grinding noise. Message says "Scanner failure. Turn power off then on again." This does not fix it. Lean the rollers in the automatic ...
...top of the printer (the side of the power button). then there should be a tab connecting the light panel to the rest of the printer( there are no wires to worry about) and finally check however many ...
...top bin full'', ''remove all paper from bin''. What does that mean? That means that the output tray is filled to capacity, or one of the students broke the "bin full flag" at the top of the
Question about Color LaserJet 3500 Printer
...TOP OF PAGE SENSOR B = PAPER LOOP SENSOR C = N/A D = FUSER PAPER SENSOR E = DELIVERY-TRAY PAPER-FULL SENSOR F = FUSER PRESSURE-RELEASE SENSOR G = MEDIA SENSOR H = N/A I = MP TRAY SENSOR J = CASSETTE ...
...top cover above it and try to free it so it can move. Below is a picture of the printer with the output sensor flag circled. My canon iR3570 keep telling me, remove the output tray.....What does this ...
...top cover. Open the media input tray and remove any media from the tray. Slide the media guides inward as far as they will go. Press and hold down the tabs inside the media input tray, and slide the ...
Question about HL-4070CDW Printer
top of the paper stack that just didn't get pushed through for some reason. After I repositioned the paper, I got the same error message as in the beginning -- no paper in tray. I'm not sure what else
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions