hl 2040 printer for christmas. Just unpacking it and it tells me to put the drum unit assembly in the printer, but it's not clear how I do that. I was trying to put it in the wrong side of the printer
...Clear" Button The Dispaly will show "Replace Drum" then Hit "1" for "Yes" You would hit"2" for "NO" Then the Display will say " Accepted" Then Close the Door and Your Done. NOTE: Please don't trick ...
...clear the drum light error. I've done this to clear the same error on aBrother HL5250DN laser printer. If this doesn't work please post your printer's model number. There is no error light on the ...
...DRUM KIT COUNTER ON A BROTHER HL-6050DN? open the door and press clear/back and then press 1 According to the Brother website, the instructions come with the new drum unit. did you check them, or can ...
...Do you have any ideas? 1. Open Cover. 2. Press the Clear key to display drum status. 3. Press 1 (hold) on the telephone keypad. 4. When the display shows "ACCEPTED", close the front cover.
...Clear/Back button. When asked new drum 1 for yes and 2 for no. Press 1 for yes to reset drum life With power on you open the front door and press and hold the stop button until the lights flash. That ...
...drum/cartridge was dropped when last changed and I am sure the toner contents were spilled. remove drum assy. and remove toner unit off drum then blow out the drum only. This should clear
drum and look for a blue tab on the top of the cartridge. Slide that tab back and forth along the wire and see if that clears things up. I have had some luck cleaning the drum when I get black streaks
drum and look for a blue tab on the top of the cartridge. Slide that tab back and forth along the wire and see if that clears things up. I have had some luck cleaning the drum when I get black streaks
Question about HL-4070CDW Color Laser Printer with Built-In Duplex Printing and Wireless Interface
drum wears out. If the quality is still good, you can just keep on printing, but will eventually have to replace it. Reset: Turn on the Printer's Power. ... Select "Machine Info" by pressing "+" or "-
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
