Questions & Answers for: toothpick Cooktops

...here is that the port holes in the burners are probably clogged. Clean ALL burners by taking a toothpick and unclogging the port holes. As for the position problem, if you have independant ...

...we need to use a lighter. If it still clicks and tries to spark, get in there with a a toothpick or a pin and clean out any spilled food and / or carbon build up. If the sparker itself ...

...clogged or obstructed, the gas can't ignite. The solution is to clean the burners thoroughly. Use a toothpick to clear the small vertical holes, then allow the burner to dry completely and try ...

...comes out and soaked them in a good bbq grill cleaner and then brushed them all off. I took a long toothpick and cleaned out each hole in the ring well. Then I put some of the bbq cleaner into the ...

...oxygen and gas for a flame to ignite. With the burner OFF, you can clean the openings gently with a toothpick to loosen the cooked on "gook." Then when you turn on the burner, the flame should burn ...

...ignite. The gas openings might be clogged. Boilovers can cause this. With the gas OFF, use a wooden toothpick to reach into each hole and loosen the cooked on matter. Once you have these openings ...

... the right igniter clicks but not the left and the burners do not come on you can use a needle or a toothpick to clean the holes where the gas comes out it sounds like they are clogged. it works in ...

...stay on. What could be the problem? How can I fix it? Need to use a small pointed object like a toothpick and stick in each small hole that flame comes out of on Brunner to clear

...burner with a match. Usually that's caused by clogged holes in the burners. I clean it out using a

...all burners. after repeated attempts the burners will start - What can I try? Take a hairpin or a toothpick and clean the hole near the igniter so that the maximum amount of gas can flow to the ...