Take out of box and measure on eye, trim if lash is too long. 2. Take a drop of adhesive and with a toothpick apply a THIN line of adhesive on the band. 3. Wait one minute for glue to start drying. 4.
...velcro strips. It's not exactly a "fix", but if you put the visor in the "up" position, a toothpick can be placed in the hinge perpendicular to the visor's shaft (a little difficult to ...
the spray nozzle. These get clogged from car wax, dirt etc. Do not use anything other than a wooden toothpick to clean the nozzle
...real cold where you are, it could be frozen! Otherwise, check the little holes and try poking a toothpick in them or pour some warm water over them... Anither thing is the washer pump could be
...all sensors had corrosion at their connections. I cleaned to bright metal both sides and round toothpick then slide back and forth so that contact areas are mating properly. Not easy to change, ...
Usually answered in minutes!
1,503 Questions
1,180 Questions
1,131 Questions
1,254 Questions
1,082 Questions
