Questions & Answers for: toner too dark

Ad

Question about LaserClass 7000 Plain Paper Fax

1 Answer

...the manual for the location of the glass, in the maintenance section, if it has toner on it copies will be black or dark, other wise the scaning glass is bad ...

Ad

Question about MFC 7420 All-In-One Laser Printer

2 Answers

...dark backgrounds. I have replaced both the toner and drum units twice. When I check the drum after printing the drum is covered in toner! Any ideas what could be causing this. Many thanks in advance. ...

Ad

...dark rest lt. print. Already cleaned mirror & reshaken toner new toner less than 3 months old,typcial usage 12-15 mth.608xl elite gcc printer. 1/3 page dark rest lt. print. Already cleaned mirror & ...

Question about LaserJet 1200 Printer

1 Answer

...dark enough I installed a new toner cartage but it still does the same thing? If you have installed the toner cartridge correctly then it is a hardware problem called the Fuser and is the most common ...

Question about Panafax UF-595 Plain Paper Laser Fax

1 Answer

...dark band on left hand side of incoming faxes and confirmation faxes. I pulled out toner and there is a black bar on whatever part is under the toner. Fuser maybe? Can I clean that? Or do we need to ...

Question about LaserJet 4 plus Printer

1 Answer

...dark faded, but continuous vertical streaks about 1 - 2" wide on right and left sides. Print is legible, even in faded areas. Open top cover and remove toner, shake toner cartridge and try a test ...

Question about LaserJet 6mp Printer

1 Answer

sheets of anything. While printing, open the cover and pull out the toner. Look down at the paper. If you see a dark streak, you have to replace the toner. If the page is streakless, replace the fuser

Question about Workio DP-4530 Copier

1 Answer

...toner, which results in dark copies. To fix this, you have to reduce the contrast (to minimum). Also, make sure that there is no excess toner within the toner supply unit. Hope it helps! Good Luck! ...

Question about LaserJet 5100 Printer

1 Answer

...dark with text Pages and i have decrease the toner density to 1, but still not avail. you will probably need a maintenance kit. After a while the toner roller and fuzer rollers wear down and allow ...

...toner by hand print is dark press 0 & 5 simmilutely m/c. on type 200 press start m/c. is moving you see screen when figure is going 230 to 245 then press enter then press intruppt hope your m/c. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...