toner dust on the sensors. First take out the cartridge that you are having problems with, then use a dust off can and carefully clean out any axcess toner that you can see where the toner sits. there
...Toner-cartridge. (2) Remove the tape to the position like the figure. Tape (3) Hold the Toner-cartridge horizontally, so that the Lever-sensor may go up and down vertically. Lever-sensor (4) When it ...
...toner cartridge, be sure to fully insert the toner cartridge into the image drum, and make sure the blue lever is pushed ALL THE WAY toward the back of the printer (fully locked position). If it is ...
...Toner Cartridge and then 541: M Toner Sensor Error. What does this mean because the printer won't print no matter what we do to it. We get this same message every time. I've had this problem several ...
...and toner cartridge to no avail. What can I do now? Check toner lock lever is in position - Seek attention of service person if restarting the printer does not correct the problem. See our How to ...
...toner cartridge lock lever is improper, drum missing or toner sensor error. this is a new printer. I have only had it for a year and have barely used it. Every time I take the toner cartridge out to ...
...toner cartridge lock lever is not in the correct position. 2. The Transfer Belt lock levers are not in the correct position. Resolution: Check the appropriate toner cartridge lock lever (Shown below) ...
...Toner cartridge lock lever is improper, drum missing, or toner sensor error. OFFLINE." I first thought it was the off-brand cartridge but have now spent more money and bought an original OKI toner ...
...toner cartridge, be sure to fully insert the toner cartridge into the image drum, and make sure the blue lever is pushed ALL THE WAY toward the back of the printer (fully locked position). If it is ...
Question about MICROLINE® 390 FB Printer
...toner cartridge is not installed properly. Re-install the image drum cartridge. Check the image drum contacts inside the printer. 2, If this step fails, then install a new toner cartridge. Bad ...
Usually answered in minutes!
259 Questions
172 Questions
152 Questions
147 Questions
126 Questions