Questions & Answers for: toilet tank fills half

...tank and overflows water into toilet bowl. Toilet in upstairs bath takes half an hour to re-fill after each flush. Have played with wall valve to adjust water flow into toilets, but does nothing. Am ...

Ad

Question about C743s-03 Drake Ound Toilet Bowl Only One

1 Answer

...toilet. However, after flush and the water gets to the end of filling the tank, the fill valve makes a loud noise when it shuts off. I called the company and they sent me new fill valves and they ...

Ad

Question about C743s-03 Drake Ound Toilet Bowl Only One

1 Answer

...toilet tank fill valve on a Hoov-R-Line 8121-1AS or get a link to a user manual. The toilet tank fills too high and it's constantly overflowing and I have no idea how to adjust the fill valve and I ...

Question about C743s-03 Drake Ound Toilet Bowl Only One

1 Answer

...toilet tank fill valve on a hoov-r-line 8121-1AS or get a link to a user manual There should be a screw on top, usualy plastic that once flushed can easily be turned to adjust the tank level. Usualy ...

Question about Bath Perfecta EZ33 959 White round high-performance toilet

1 Answer

...tank. If so this is a water saver toilet. A few tricks to increase the water. I have had to remove the bucket by cutting it maybe half into to increase the gpm. This will increase it to more than 1.6 ...

Question about 2002.014 - Champion4 Right Height Elongated Toilet Combination - Two-Piece

1 Answer

half hour i check there is no water leaking any where Hi, Put some cake dye in the tank in the back and you will see it showing up in the bowl....the flapper in the bottom of the tank is leaking very,

Question about Drake ADA Compliant Toilet with Elongated Bowl

1 Answer

...toilet. Water level in bowl is low. Water Level Adjustment 1. To adjust, simply turn upper half of valve counter-clockwise to unlock, pull up till water line on valve is level with water line marked ...

...half of the tank is filling ,it becomes quite vocal , like a loud hum ! any ideas ? What probably is happening is the valve in the fill tube is warped or worn. The easiest fix is to replace the fill ...

...off when the tank is full. ... The bowl is filled with the water that goes into the overflow pipe. ... Unfortunately, when a toilet bowl is clogged and the water level rises and doesn't flush the

Question about Antiquity/Repertoire Round Front Toilet Bowl in White

1 Answer

pressure drops from 50psi to 10 psi after flushing toilet. Once toilet tank fills the pressure goes back up to 50psi. That is normal. If you want less pressure fall turn the water supply line half off

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...