Questions & Answers for: toilet flush handle loose flushing

...flush our toilet, the water flow is not very strong and you have to hold down the handle to even get it to flush at all. you either have the wrong flapper or it is not adjusted right try moving the ...

...flush I have an Eljer two piece toilet, I have to hold the handle down the entire time it is flushing, if I let go, it stops flushing. What can be done about this? lift the lid,and look, flush, the ...

...flush toilet, it sounds like the internal flush actuator lever is hitting the top of the toilet on the inside. Remove the lid, hold the exterior handle. and carefully bend the lever down a little. ...

...toilet wont flush no pressure when depressing handle handle is loose in fitting Take off the top lid and look at the flush handle mechanism. You'll see a not that holds it onto the tank. Tighten the ...

...gets loose and we have to open the tank and tighten the black circle that is connected to the handle. The black circle keeps getting loose even after one flush replace the handle they are ...

...flush the toilet does not rise after it is pushed down, causing the toilet to run. One has to push the lever (handle)up after the down motion to make it function properly. I had this issue as well ...

...Toilet flush levers are always adjustable. For the most part, there are two types of chains that attach to the lever. Ball chain or linked chain. Either way, you'll see that there is a rod behind the ...

...Flush Valve A continuously running toilet can also be the result of a faulty flush valve. Because the valve is made of rubber, it can decompose or warp allowing water to escape from the tank into the ...

...flush handle: Remove the cover from the toilet tank (the higher part at the back of the toilet). If the handle is loose, tighten the locknut with a wrench. If the nut won't budge, apply penetrating ...

flush Toilet water up to the rim! Black line is open but toilet will not flush. Sure 3" valve has been pulled ? If handle feels loose, slides in and out easy, it may have come out of gate valve (slide