Questions & Answers for: timing marks geo metro 1

...timing belt on a Geo Metro, 3 cyl 1 liter, and the camshaft moved, How do I reset the timing? you should have 3 gears that hve a mark on them. line them up with each other, then you need to get a ...

...line it up straight up and down. niether those are timing refernces u use the dot good luck timing mark = use the dot as dtc timing referance marks i just went through this for 2 weeks it spanked ...

timing belt marks I'm trying to install a timing belt. How do I set the cam pulley so I can time it to the crankshaft pully on a 1992 GEO 1 liter eng. I can't find any marks on the camshaft to aline ...

...geo metro timing I need to know the position of the crank and cam to replace timing belt. The cam position lines up with a notch in the tin piece that the timing belt cover bolts too. The crank lines ...

...timing marks are as follows 1. there is a "V" on the cylinder head cover. 2. Timing mark on camshaft timing belt gear 3. "Arrow mark" oil pump case 4. Punch mark on crankshaft gear. DON'T MESS UP! ...

geo metro engine the main bearing caps go on startine with #1 at the pully timing belt end of the engine with the arrow pointing in that direction. Then #2 and so on in the same manor. Hope this helps

Timing belt for my Geo Metro 95 hatchback , 3 cylinders. 1.0 liter.5 speed manual. I guess it has 108340 miles. Before it breaks I want to replace it. roll the crankshaft pulley around until u get the

...timing marks, (with engine warmed up) rotate the loosened distributor until the mark lines up with the 5 or 6 on the plastic timing belt cover near the pulley. This would put your timing 5 or 6 ...

...timing marks are "ON" the dowel pin or key for the cam will be at the 12 o clock position. Also if you have the valve cover off, both cam lobes for number one cylinder will be pointing down.and both ...

...timing marks 3 cylinder 1 liter 3 posts. now adds torque, next will have the full FSM book in print here. https://www.google.com/webhp?gws_rd=ssl#q=metro+head+torque++3cyl+site:fixya.com timing ...