...it would go into gear but had to be shifted manually as it does now.Can tcm cause shift lock to stay locked,any ideas,thanks Mark I have a 1993 honda accord and my clock won't keep time,can you ...
need to know how the timing marks should line up for belt replacement there should be two marks right on top of each other one on top and the other on bottom.
marks on the cover line up each with the mentioned shafts). If you know that those bottom pulleys are then in the correct positions on their shafts, with the timing pointer aligned with the white mark
...Timing marks appear vehicle runs with low power. Timing marks appear retarded ( using timing light) with max advance from distributor position. I think belt was installed off 1 notch or more. What do ...
...timing marks and belt tension properly. Tried to start but, turns over but would not fire. Found that had no spark.Dbl. checked my connectors and distributor timing, all ok! Is there a procedure I ...
The Clutch is stuck to the floor? Check the slave cylinders fluid level in the reservoir It will have a cap on it marked clutch fluid. If empty fill it and pump the clutch 25 times and then try it out
...timing marks for my 1990 honda accord lx because the cover is slightly woren but are the timing marks on the cover or engraved in the metal? this is for the crank shaft. The 1990-1993 accord timing ...
...timing belts for a 1993 Honda Accord LX check the valve clearance. If you have valves with excessive clearance, then they are bent. the cam gear will have 2 flat marks that line up with the surface ...
...a Haynes book and reading the procedure.If you have a place to work on it, and the tools, its not impossible. But you have to be careful to put the belt back with the timing marks in
timing marks for f22a6 engine Incorrect removal or installation of the timing belt can result in damage to internal engine components.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions