...timing chain. Some of these car came with a fibergear set instead of a metal gear set. You will have to pull the water, then the timimg chain cover. You wil have to replace the top & bottom gear on ...
...Yes, there are two timing marks, one on the crank gear, and one on the cam gear. The crank gear mark needs to be at the top, and the cam gear mark needs to be at the bottom (lined up w. one
Question about 1983 Chevette
set timing after changing timing belt. bottom gear go straight up top gear sets about 2oclock thers a small hole in the gear too line up with a hole in the head use a small drill bit too check this!!!
...timing gear became loose in the dismantal. to get this ehgine to work i need to set the timimg gear in the correct position the engine free to turn but wont fire up. many thanx Hello If I Understand ...
gear and timing cover gasket set about $475.00, less $65.00 if going to used same gear's. on an 2.4L engine both cam gear's, crank gear, timing chain and balance shaft chain, gasket set ( timing cover
...gears are usually cast iron. If you are thinking about changing the timing gears, the crank gear has to be pulled off with a puller, a lot of guys don't bother since it doesn't wear like the cam
Question about 1996 Cavalier
chain and gear set. factory timing gears are nylon coated, so wear out in time. the eratic idle indicates wandering timing, controlled by timing gear set. suggest new ones that do not have nylon gears
timing tab,pull the balancer back off and slip the chain on the crank gear after finding the single dot on the chain.Set the mark on the cam gear at very top and put the chain mark on that mark on the
...Timing Gear 2 RH Bank Exhaust Camshaft Timing Gear 3 RH Bank No. 2 Timing Chain 4 Crankshaft 5 Idler Gear 6 Timing Chain 7 LH Bank No. 2 Timing Chain 8 LH Bank Exhaust Camshaft Timing Gear 9 LH Bank ...
how to set a smart gear for time and date ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions