Question about 91112 / 91114 / 91117 Electric Kitchen Range
...Kenmore electric range model 911.9369181. Every time we try to use the oven, we set the temperature and turn it on. Within a minute, it will shut down on its own. We have tried setting the cook time ...
Question about 91112 / 91114 / 91117 Electric Kitchen Range
time I stopped procedure and waited approx. 15 minutes then tried again to clean oven and it worked with no further codes. My question is whether or not you know what these codes mean and if I need to
...kenmore 790.46702601 is the model listed on the inside of it. to exit sab mode press and hold the "cook time" and "delay start " pads for 3-5 secs. the letters "sab" will appear in display and your ...
stove when it was pluged back in the oven wont work i cant get the display set,time, nothing. My burners work. (coil) but not the oven. we did unplug for 10 mins. but still not working. ok an oven won
Question about 79012 / 79014 / 79019 Gas Kitchen Range
...Range Repair Help, Troubleshooting, and Parts Kenmore & whirlpool are the same. I have a ken more Range but is digital to set up, I have hard time to turn the oven on some body can help me? ...
Question about 46564 / 46565 / 465 / 6646569 Electric Kitchen Range
...Kenmore Elite Electric Slide in Range. My oven manual says to press both the (timed oven) "cook time" button and the "delay start" button at the same time for approx. 3 seconds and ...
Question about HE3 Steam 7.2 cu. ft. Super Capacity Electric Dryer
...stove timer Dryer has a moisture sensor that detects the clothes are dry so it shuts off earlier. If the clothes are still damp then the dryer vent may be plugged and causing the unit to run hot or ...
Question about HE3 Steam 7.2 cu. ft. Super Capacity Electric Dryer
...kenmore stove. The cook top all works just fine. All the controls indicate it is working. No error codes display. But the elements for both the top and the bottom are not heating up. Is there a fuse? ...
Question about HE3 Steam 7.2 cu. ft. Super Capacity Electric Dryer
...time on my kenmore stove, did as instructed and it was OK but few seconds later the display went black, push the clock button and the display show the right time (meaning the clock is working ...
...then set the time. That should stop the beeping (if it's displaying PF). if any other error code is displaying, I would need to know your range model number, and the code that was being
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions