Questions & Answers for: tighten belt car mazda protege

...it just replacing the belt wont do the trick belt has to be properly tightened, usualy it is the power steering belt which is hard to reach and tighten so make sure that all hte belts are tight ...

Ad

Question about 2000 Protege

2 Answers

...Mazda Protege replace belts how do you tighten the belts change the new attentioner,u can,t tight Tightening the alternator and the power steering belts on a Mazda is not too hard, but if you ...

Ad

Question about 1997 Protege

1 Answer

...car_repair_information/year/1997/make/mazda/model/protege/1997_mazda_protege_drive_belt_routing_diagram.htm Click on the following free direct Link. It has the Belt Diagrams for your 2002 Mazda ...

Screaming and squealing of my 1997 Mazda Protege...how can I fix this? You can tighten the alternator belt and/or replace it. u have to listen where came from the the noice u should be fix it

...all you have to do to stop the squeal is tighten the belt. Good Luck Hope this helps! Its not the timing belt, it it was, the engine would not run. Its your alt belt. Either tighten it or replace

...tighten the belt back correctly. After that car kept draining battery eventually it messed up my alternator after replacing that again he did the belt wrong and I had an issue. Finally got a big pry ...

...belt on a 2000 mazda protege pretty easy, loosen the power steering on top and bottom, then there is a long bolt sideways on top of p/s pumy crank it in or out whichever loosens replace belt and ...

MAZDA parts or third party from an Auto Parts Store. I hope you got one with a lifetime guarantee... Good Luck.... The serpentine belts on these cars do not have automatic spring tensioners, the belts

Question about 1995 Protege

1 Answer

...belt on and tighten back up leaving the belt a little loose? There should be a automatic tesnioner IF you are talking about a Pontiac? the belt should never be "loose". no pullies to loosen. A 95 ...

...bolt but the belt wont tighten what do i do? you might have wrong belt or you need to make sure you are following the belt correctly where it needs to go. take a picture before you take off

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...