tiger shark has bubbles coming out of top but will not move bubbles come out of the top but will not move Something is caught in the tracks that make it move. Look under the blue track that move it. I
Question about Vac Tiger Shark
...Tiger Shark from sticking to the main drains. How can I keep my Tiger Shark from sticking to the main drains in my inground pool. Decrease suction on main drain and increase suction to cleaner. They ...
...1/2 hour it would not move out of the deep end and wouldn't go up the walls. Mine does exactly the same ,and everyone I speak to has problems with Tiger shark,And try to get it resolved,NO
...tiger shark pool cleaner will run for about 30 sec. then shut off. how can i fix this problem? The pool cleaners impeller may be clogged or jammed with debris. Check and clean if necessary. The brush ...
Question about Tigershark Plus Robotic Automatic In Ground Pool Cleaner
Tiger Shark is sqeaking. I think the wheel tube bearing assembly is broken. How do I replace this part? Thank you for posting your question here on Fixya.com. Either side's drive system is composed of
...tiger shark pool cleaning robot,I put foam rollers on it and it worked perfectly well, It climbed the walls and did everything it was supposed to do. Then one day it just decided not to climb the ...
...tiger shark does not work!! I have power to the transformer and shark, but it won't move. I just spent $400.00 at my pool store to get it fixed, they put new wheels, filters, and a new cord and ...
Question about Vac Tiger Shark
tiger shark running it would run partial cycle and quit then it just quit running. I tested power supply and was getting power from it. I then tested cable from power supply to unit and could only get
Question about Vac Tiger Shark
...Tiger shark was repaired with a new motor last fall. This is the first time it has been used since then. When putting in the water it is running but fails to go forward or backward! What can I do? it ...
Question about Hayward Tiger Shark QC Pool Cleaner RC9990GR
Why does Unit run momentarily and then stop? I have cleaned the impeller and brush rollers/tracks, but unit runs momentarily and then stops! How do I fix this problem? https://www.hayward-pool.com Ask
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions