Questions & Answers for: tie rod noise

...tie rod ends or several other front end items. Can you jack up the front end? If so then turn the wheels from side to side with your hands griping the wheel at the 9 and 3 oclock positions. if you ...

...tie rod and there is still problems coming from wheels like the whine noise. Then yesterday I filled the tank while engine running and my gas gage is going back and forth fom full to half? Tie rods ...

...tie rod. You could feel it squeak in your hand while someone else turned the steering wheel. I disconnected the tie rod. I wasn't worn, just squeaky. I squirted a little WD40 inside the boot, and ...

tie rod ends can make a clanging noise if they are loose. You can easily check them - grab a hold of the tie rod and try to move it around to see if it has any play in the steering knuckle.. The noise

...tie rod ends i don't know if its inner or outer. How can i tell what the problem is and how hard it is to fix. does it kinda sound like two peices of metal striking each other? most likely the outer ...

...Tie rod ends, inner or outters cause that type of noise, loose steering mount bolts in the undercarge, binding steering shaft and or binding movement of the half shaft . Ball joints as well can make ...

...tie rods will not make any noise whatsoever. What you need to check is the axle shafts coming out of the transaxle. You can do this by having someone walk along the vehicle as you make extreme right ...

tie rod. I just bought and changed both outer tie rod ends, smoother ride but still making the noise... The noise is synched with the turning of the wheels but the slower I go the louder the noise is.

go the slower the noise go. i all ready change the tires. what could it be?? how about your tie rod in and ball joint checked, usually the tie rod in always worm out. or also the bearing at the hub...

...a clicking noise is heard from under center of dash under floor board mayby the rack or tie rod end. no play in outer tie rod ends please share ideas 2004 Ford Focus. I would need to hear the ...