snapping back to position when twisting the throttle.can any one help thanx bry. You may have over tighten the screws. try backing them out then when they are snug give just another 1/4 turn. Try that
Question about 1993 XLH Sportster 883 Deluxe
...throttle does not snap back when I release it. Could be an issue with a spring on the carb. You either need to lube the cables, or adjust them. You adjust the throttle to have a 16th to an 8th ...
throttle release and back fires alot when coasting with throttle off . klr 250 Possibly throtle is sticking or "hanging-up". Lube and test throttle cable assembly. Make sure you can twist throttle and
...throttle cables adjusted too tightly. Back both of them off just a bit and retry. You want the throttle to "snap" shut on your bike. If not, it could cause you serious injury or death. If you're not ...
Throttle not snapping back to idle position on 1998 Harley road king classic. I have lube both cables and adjusted them, still won't snap back. Thanks for your help. You need to take the entire ...
Throttle not snapping back I just bought an FZR 600 and have been working the kinks out of it, one of them being the throttle sticking when i rev it, almost like a cruise control. Pretty scary! I have
Question about 2006 XL 1200 C Sportster Custom
......
Throttle will not snap back While installing grips, I twisted the throttle too hard against the accelerator cable, heard a click and now the throttle will not snap back to idle. Any suggestions? the ...
Throttle won't snap back Hi, Anonymous you either have the cables improperly adjusted or they need lubricating for this scenario you will need your service/owners manual if you can't find the first ...
...the way open you'll see the cable move back then while throttle is wide open snap locking button back is mind you this is on GM older models it is best you always include yr., make, model when ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions