...throttle cable in ryobi trimmer 30000a Disassemble the handle. Remove the cable and pay attention to the HOOK in the carb throttle. Install the new cable in the exact location, positioning it in the ...
...throttle handle should have a round pin at one end which connects to the throttle cable, there is usually a plastic outer cover that is retained by a threaded screw which holds it all together on the ...
...Throttle/handle? I don't know how to get the spring to fit back in the handle of my McCulloch Power Mac 310 Throttle/handle assembly. There is a handle detail near the bottom. I suggest you save this ...
...throttle handle the flap does not moveon carbeuter Hi there, The throttle cable is either broken or disconnected at one of the ends. I don't know your model, so I'm going by what most Homelites have ...
Question about Forest & Garden 125c 17" Curvgastrimmer
...throttle handle broke. I replaced it but now I can not get the throttle to depress. When I removed the handle the cable and and spring were not in their proper location. I do not know the proper ...
Question about Forest & Garden 125c 17" Curvgastrimmer
...to the(carb or throttle body).Either the cable is broken,it has come off at one end,or the throttle handle or a piece of linkage is broken or loose.(this is a pretty basic problem-you can do
Question about 2011 Sport 50
...throttle/handle to twist. Throttle/handle is loose. The throttle/ handle is loose. I can move it about one cm to the left and right. you need to replace or tighten the throttle hold down screw right ...
Question about 235E - 16" 34cc Consumer Gas Chainsaw
...throttle wire to the carburetor and handle on my husqvarna 235 chainsaw I took the carb out to clean it and I have the carb back together I just don't know how to fix the throttle wire (bent ...
...throttle on handle bars. Release tension on throttle cable by loosening cable adjusters. Release cable from carburetor. Release cable from throttle housing on handle bar. Reverse instruction to ...
Question about 235E - 16" 34cc Consumer Gas Chainsaw
...height. Engine turns fine. Runs great at one speed. With the engine off, Check the linkage cable from the handle to the carb, making sure , at full throttle at the handle the carb is at full
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions