Questions & Answers for: thread

Ad

threading a husqvarna huskylock 1001L serger unable to locate my manual...just need help on properly threading the machine. Solution taken from "Handbook for Huskylock Sewing Machine Models ...

Ad

Question about Singer Sewing Machines

1 Answer

bobbon thread is too losse /thread breaks no bobbon thread is too losse /thread breaks /no mater what stick i use have sewed in high school tryed all I know to fix Clean out the bobbin area. Thread ...

Ad

Question about Deluxe 6130 Mechanical Sewing Machine

2 Answers

I have a hard time threading this machine and a hard time getting the bobbin thread to come up. Hello Place spool of thread on the spool pin, found inside the carrying handle on the top right side of ...

Question about Shark Mini Mechanical Sewing Machine

1 Answer

How to thread the machine Hello Place spool of thread on the spool pin, found inside the carrying handle on the top right side of the machine facing the back. Lead thread through the upper thread ...

Question about 2037 Mechanical Sewing Machine

1 Answer

white 2037 twin needle keeps breaking thread I have a White 2037 and I've never yet managed to do twin needle sewing. My thread always breaks after a short while of sewing. I put a spool plus a bobbin

Question about 2037 Mechanical Sewing Machine

2 Answers

L5 serger overlocker. Why don't the threads make a chain? rethread machine, make sure u thread all steps FIRST: Remove ALL the threads from your machine by clipping the threads between the spool and ...

Bernina 335 serger won't sew/overlock. carefully rethreaded the serger but that hasn't helped. Changed the needle in a well-maintained 335 Bernina serger and rethreaded it. The 335 has a two thread ...

Toyota overlocker sl3000 ; 3rd thread keeps snapping. How do I stop this ? Third thread--is that the upper looper? Remove all the threads from the machine. Clip them below the thread tree, RAISE the ...

I got a bernette 134d overlocker and the Nr 3 thread keep on breaking. What's wrong? Most often, it is misthreading. Remove all the threads from the machine. Then rethread each thread in the order ...

...Is that a Bernina? Which model? Usually, if you are experiencing improper stitching and/or broken threads, it's most often a mis-threading problem. Proper threading is EXTREMELY important to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Chris Wetmore

Level 2 Expert

187 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...