Questions & Answers for: thermostat rth7000

rth7000 thermostat and it does not give me a wiring diagram for two wires which colors are they? one should be from the igniter that goes to W on the thermostat and the other goes to Rc just make sure

RTH7000 thermostat but I cannot get the heat or the AC to come on. The fan works fine and the thermostat kicks on and off. I must have some wires off somewhere. I cannot findout what X and O or for on

...RTH7000-fr.pdf i would think that the wires would connect up the same way they came off the old thermostat..i would try to do that first connect them all the same as they came off the old one and see ...

...RTH7000 programmable thermostat. The house has two zones and I am only replacing the thermostat on the first floor. When I removed the old thermostat I have 6 wires - R-red, Y-blue, G-green, B-black, ...

thermostat and putting in a programable RTH7000 series from Honeywell. My old one has A wire and new one does not. Where would that go or is it not needed on the new thermostat? your old thermostat is

...RTH7000 Series Programmable Thermostat If you have a spare wire (unused) in the thermostat wire sheath you can eliminate the batteries as the power source. Turn off the power to the furnace. Open the ...

RTH7000 thermostat won't maintain the heat I've My RTH7000 thermostat won't maintain the heat I've chosen to "Permanent Hold" ... I set it to hold heat at 20 (celcius) and the room temperature usually

how do you reset a thermostat rth7000. not the program, but actually shut down and restart as the furnance is not kicking on Remove battery and reset it.