Questions & Answers for: thermistor circuit hotpoint aquarius

...thermistor is "Open Circuit" and I think it is situated on the heater assy at the back of the machine. Check the wiring and contacts between the thermistor and the PCB. If you still get the fault it ...

GET REALLY STARTED AND IT STARTS CAN U HELP The error code F03 indicates that the wash thermistor is open or short circuit. Check heater element and thermistor,if ok, then you need to call an engineer

there is a error code f 03 flashing can you help thanks Hi. F03 indicates that the wash thermistor is open or short circuit. I think you need to call engineer to sort the problem Please leave feedback

...circuit thermistor, this is associated with heater element, so probably the water is not getting hot. You need to check the heater and thermistor unit. access is from the rear. Hope this helps. Plz ...

...told once before to turn it off and then back on F03 - Wash thermistor open/short circuit If this error persists it's usually best to call fro service unless you are familiar with this kind of

...How easy is it to repair? Error code F03 is indicating a problem with the wash thermistor, it could be open or short circuit. Check connections on thermistor and heater element. Hope this

F-03 ON HOTPOINT MODEL WD640 FAUT F-03 F03 - Wash thermistor open/short circuit*

...Check security of module connector J12; • Test from connector pins (approximately 500 Kohms); • If open or short circuit, test thermistor and wiring between thermistor and J12 to locate

...circuit) and kept using the machine just for washing. I have bought new heater element and replaced it. I have also tested intake valves (they work ok). But after replacement the washing machine ...

...thermistor open/short circuit* F04 - No pump piloting* F05 - No feedback from the pump* F08 - Static heater relay with contact welded closed* F09 - Eeprom is not programmed or not functioning* F10 - ...