Questions & Answers for: thermalcoupler

Wall heater new 07, worked great all last season, turned on this year worked fine 4 days until gas co. added additional tank yesterday and now won't stay lit for very long. Relit 5-6 times over ...

vs24pr propane heater pilot lights then when you turn control to on and remote switch to on flame lights but only stays on for a few seconds then clicks and turns off. i would change thermalcouple ...

Pilot won't stay lit on Dyna glo wall mounted heater I would check the flue out side first to make sure it is not blocked. If flue looks good i would try cleaning or replace thermalcoupl. Most of the ...

I dont have hot water after i change the thermalcouple I dont have hot water diaphrapm valve or micro switch

the pilot light keeps gooing out and heater constantly shuts off sounds like you need a new thermalcoupling

pilot is not heating thermalcoupler pilot does not reach the thermalcoupler and is not heating it. You may have a dirty pilot orifice. Try this. Turn off the pilot by turning the control knob to off. ...

pitco 35cs pilot won't stay lit when you let up off the button thanks for your help may not be holding in long enough,try 30 seconds.If it dont work may be bad thermalcouple.

my hot water will not ignite and heat the water despite many attempts to reignite it you need a new thermalcoupling.

Pilot won't stay lit, replaced thermalcouple but Pilot won't stay lit, replaced thermalcouple but still have same problem I would remove pilot light assembly and clean orifice and blow out gas ...

How to replace the thermalcouple on the GAD860SP LP Gas Firebowl I tried all the troubleshooting suggestions. Called helpdesk and they determined it was the thermalcouple which was still under ...