Questions & Answers for: texlon ptc 710

...hope this helped. Good luck! HO UN TERMINALINO TELXON PTC 610-710-910 E' HO BISOGNO DI RICONFIGURARLO CON UN NUOVO COMPUTER.QUALCUNO MI PUO' AIUTARE MANDANDOMI IL FILE DEL TERMINALINO CON LE ...

PTC-710. We are getting an error code 68> . We use it to scan library barcodes for inventory. How can we reset/get back to our main menu? We would be grateful for any help/advice. Hello, Hit [6] to

...an error message on my telxon PTC-710 - i.e 68> when switch on. Please advise. Thanks Hold the 5 key down for three beeps. This should clear the memory and return you to your software

...symbol ptc 710. its got error 67>. how can i fix that That is probably not an error, these devices use an operating system called Tcal, 67 is the version. The device is ready to load

...ptc 710 These old Telxon devices had a switch in the battery compartment to disable the backup battery for storage, power off the unit then change the switches position and try again. If you still ...

my telxon 710 will not turn on Try to "three key" the device. Hold the bottom left and right key (No & Enter button on my device) and whilst holding press the power button. This will boot into DOS

test data area appears on screen wht do i do Turn off the 710, three key the device (bottom left/right button - No & enter key on my device) this will boot into a DOS/Tcal prompt so you may load ...

telxon PTC-710 just showing 66 on the screen screen just showing 66 You have no arc chip below the os chip or the ptc is not seeing it.

...PTC-710 is stuck on code 61 (61>). How can I fix this? 1. Held down space and enter while turning it on 2. Held the 5 key down for 3 beeps 3. Turned off and on again 4. Pressed 6 5. Entered 58 ...

...PTC-710 has utility readings stored on it. Computer software update made the unit incompatible. Can the information stored on the device be viewed without connecting to computer? Googl it or call a ...