Questions & Answers for: tensioner froze

the tension pulley on my 1997 buick lasabre froze up and the belt came off. take the tension pully off the car and go to a junkyard or dealer, which ever you perfer and get a new one. the bearing ...

Ad

i just put in a new belt for my 2000 jeep cherokee sport and i started the car and it squeaked really bad, how do i fix it? if you put these belts on yourself then you didnt tighten them to the right ...

Ad

snow blower auger keeps running when not engaged....any help would be great...yard machine 5 hp model #31b-611d352 same problem with crafstman model #536.886350 sounds like the tension adjustment is ...

...tensioner hard to adjust? something possibly froze up caused your belt to snap...spin by hand, all your pulleys including the tensioner. One maybe stiff or stuck, if not then follow the belt routing ...

or around the engine well. Find the idler tensioner pulley, install the belt per the diagram, using a wrench or ratchet to release the tensioner to get the belt on. Make sure the tensioner isn't froze

...froze. Belt melted on road to nowhere. Hauled in and new water pump installed. Specified belt to loose, the belt tensioner was missing. No part there, but there never seemed to be a part on the boss ...

Question about 2002 Silverado 1500

1 Answer

Tighten. If it feels tight. Then the belt is likely dried out and needs to be replaced... Check tensioner to be sure nothing is froze up. Like water pump or tensioner pulley. Check other belts as well

Question about 1994 Cutlass Supreme

1 Answer

...might need a new one. And before you put belt on, check all your pulleys that belt runs for proper (free-wheeling) operation. If another pulley froze up, it could cause your tensioner to

...tensioner because it was froze-up I also replaced the belt and now the tensioner flutters and jumps back and forth even with the A/C off, does anyone know if there is a fix for this problem. Sounds ...

Question about 1994 Cutlass Supreme

1 Answer

where to find instruction manual Top tension knob for blade adjustment is seized ? . What's the model of your band saw? The problem would be the tension rod itself. Try to clean the knob too. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...