Questions & Answers for: ten blinks

Ad

Question about VT47 Multimedia Projector

1 Answer

...blinks 2x 7 Steps (5&6) happen 4x Thanks for your help, Karl If it is a lamp error try this: When the lamp exceeds 2100 hoursof service, the projector cannot turn on and the manu is not displayed. Do ...

Ad

Question about 1990 CRX

1 Answer

blinks first the red one is like the tens one blink is ten two is twenty and so on the green is ones so three blink red is 30 and 4 blinks green the code would be 34 When you get your codes contact me

Ad

Question about Grand WEGA KDP-65WS550 65" Rear Projection HDTV

1 Answer

...blinking light on tv turns on for a few seconds with sound but no picture, turns off after. blinking light comes on ten times, stop, blinks ten times replace power board i have one to sell ...

Question about KP-57WS520 57" Rear Projection HDTV-Ready Television

2 Answers

...Ten blinks on Sony HDTV means-- Check Transistors Q8014 and Q8013 on D- Board for shorts, leakage, or bad solder connections. If the transistors are bad, then also check R8051 and IC8005, these are ...

Question about VIERA TH-65PV500 65 in. Plasma Television

2 Answers

panasonic 42" plasma viera will turn on and then turn off in seconds. then power light will blink ten times pause and blink ten times again Loss of power from power supply. Usually bad power supply. ...

Question about Grand WEGA KDP-57WS655 57" Rear Projection HDTV

1 Answer

blinks ten times and stops for sec and starts the ten blinks all over. When I turn TV on I can hear sound of the tv trying to turn on but no sound or picture. Hi, 10 blinks on KDP-57WS655 model no. is

...blinks TEN times. It blinks TEN times (not SEVEN). Does anyone know how to fix this? Check and see if there are any blown caps on the power supply. If there are replace them or change your power ...

Question about TH-42PZ700U 42 in. Plasma Television

1 Answer

...and all I can see is blinking red LED. Any clue how to fix this? Please help. Try unplugging it for ten minutes TEN MINUTES not ten seconds, Then plug it back in and see what happens. If that doesn't ...

Question about TH-42PZ700U 42 in. Plasma Television

1 Answer

Panosonic lcd tv . when switch it on green lights blinks for some seconds and it tens on and for some minutes it tens to red and blinks but no sreen These blinks [flashes] are fault indication (Error ...

...on, when I turn it on There's a red light that blinks ten times. How can I fix my Tv and what does the ten blinks mean? Sorry to say but that mean you have a bad panel, whats the model number

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

5909 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...