Questions & Answers for: temperature guage moving back forth

fuel guage does not register correct amt of fuel. constantly going back and forth it moves back and forth even if its at a half a tank when i take off it goes to full and when i slow down it goes to e

...temperature guage flickering i have an excel 95 and the temperature guage has started going up to the red and flickering when the left hand indicator is put on but the engine is not overheating. i ...

...back and forth Is it the factory oil guage? Is it an electronic or mechanical guage? if it is mechanical that means you actually have a small diameter tube from the engine to the dash area, which may ...

...off and sometimes my fuel guage moves back and forth like that a bit. what do i do to fix this? This sounds like you have a ground problem probably under the dash or possibly in the inst.cluster ...

...temperature guage (on either the upper or lower oven) on and off, the locking latch incrementally (very small movement) moves outward from the oven frame. Eventually, when turning the temperature ...

...95 Chrysler LeBaron. The Battery Guage won't move. Shows no voltage. I replaced the Aternator, and the guage still does not move. Is your guage an Amp guage or Volts guage. Amp guages do not move ...

...Temperature guage goes from cold to hot then goes back down. Heat seems to work when the temperature guage is lower but as soon as it goes up the heat turns cold. i going to assume you have the 3.4L ...

...temperature gauge either does not work at all or it bounces back and forth with acceleration or deceleration. The gauge goes up when you accelerate and it goes all the way down when you let off the ...

...temperature guage moves towards hot and the vent blows out cold air, but when I turn off the heat, the temperature guage moves back to the middle. Make sure that your radiator is filled to the proper ...

...temperature gauge moves back and forth Daewoo Matiz 2002 please help. Question edited for clarity, punctuation and CAPS. If it is moving wildly it is a bad connection or a bad instrument cluster. If ...