Questions & Answers for: temp probe beeping

Question about SCE30600 Slide-In Electric Kitchen Range

1 Answer

...probe" message next to the temp display. We have tried clearing the controls by holding down both buttons on the display, and also unplugging the unit completely for several seconds. No luck, it just ...

Ad

Question about FEF355 Electric Kitchen Range

1 Answer

...temp probe. 3. The control itself may have a shorted relay-replace the control. The temp probe should ohm at approx 1100 ohms at room temp. Unplug the oven for one minute, if the code returns, first ...

Ad

Question about JES9800A Electric Kitchen Range

1 Answer

...probe problem So here is the issue, my jenn-air when oven is being used usually at a higher temp like 365 degrees will in the middle of cooking will start beeping flashing "Insert meat probe" When I ...

Question about JES9800A Electric Kitchen Range

1 Answer

...temp probe and problem persisted. Is the element bad? What are using to measure temp ? Are you using a grocery store bi-metal or professional thermal probe ? and further to that, how long are you ...

Question about JES9800A Electric Kitchen Range

1 Answer

...this is and open probe connection.check the wiring harnes between the electronic control and the probe. if the resistance is less than 500 ohms on the oven probe at room temp replace the ...

Question about JES9800A Electric Kitchen Range

1 Answer

or F3 your oven temp probe may be bad. you can verify by measuring the ohms across it should be less than 3000 ohms if it is over 3000 ohms the probe is probably bad or open wire or damaged temp probe

Question about KESC307 Electric Kitchen Range

1 Answer

...probe temp (and beeps every time) when probe is not even plugged in oven. When placing the probe in the oven jack it feels very loose. Is it possible the contacts inside the jack are broken or faulty ...

Question about KERC507 Electric Kitchen Range

1 Answer

...probe is in fact inserted. If that is the case how do I check the insert? Hi This means a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To ...

Question about KERC507 Electric Kitchen Range

1 Answer

...after a minute plugged back in. Less than a minute later, problem started again. sounds like you have a problem with the temperature probe - system defaults from temp to a time cycle if the probe ...

When I set temperature to preheat at 350, it beeps when temp reads 250. WHAT IS PROBLEM? oven temperature is inaccurate. lower than desired by about 100 degrees.ie set bake temp for 350 & it beeps it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...