Questions & Answers for: temp light benq projector

...light is on, but the Temp light is flashing orange. Please help ASAP. -Andrew It might be caused by the logical board or a sensor of it; you have no other choice but taking it to the repair

...LIGHT UP WHEN YOU PRESS THE POWER BOTTON ON THE CONTROL PANEL. ALSO THE POWER , TEMP AND LAMP INDICATOR LIGHTS ARE ALL OFF. THE TWO EXHUAST FANS DOES NOT SPIN. REPLACE BULB DOES THE SAME THING. Mine ...

Benq PB 6200 variable fan stays on low and unit shuts down. Power temp and lamp lights flash. Where is the sensor for the fans and can I replace it? YES! This sensor is for sale on Ebay.... http://cgi

...temp light and the lamp light both started blinking red. Unplugged it and waited a while and tried it again. Same thing happened. this model is prone to over heat. look near the lamp for the temp ...

...temp indicators. Help! Is there a way to reset? Nothing comes on--not the lamp or the fan. you can go to the BenQ website and download a manual for your particular projector. It should tell you what ...

...doesn't turn on.power,temp,lamp orange light are on power,temp,lamp orange light is on overheated. clean it out with canned air. try again. if it still has an issue, you may have a main board

...temp light is Green and the Lamp light is Yellow. Do I need to replace the lamp, has it gone bad? Yes. Here's a cheap one on E-bay, too. ...

...Benq MP670 does not turn on. It shows lights for power and after 2 seconds it shows lights for temp and lamp. I replaced the lamp with a brand new one, but there is no difference. What can I do? ...

Temp light goes green and the Lamp light goes red. Look at the manual page 34, for the indicator messages. I suspect it's the same problem I have (which I haven't had formally diagnosed yet!), which I

...temp light comes on and screen goes dark after 3-4 min? just replaced the lamp with Osram replacement as usual. Now the screen goes dark after 3-4 min and temp light (GREEN) is on and power light is ...