Questions & Answers for: temp gauge working dodge 1500

...temp runs at about 3/4 hot on the gauge but in the afternoon going home its abov 3/4 and just about to red line. it seems to cool down when I get on the city roads though. I havee already changed the ...

Ad

temp. If you did not have a gauge, likely you would not see this 'till there was a larger problem. Have both radiators flushed and see if problem disappears or lessens. also make sure that clutch fan

Ad

Question about 1994 Ram

1 Answer

...temp sender on engine and ground lead, watch gauge for kneedle movement if it moves to register then remove and replace temp sender unit, if not check power supply to gauge, and related fuses and or ...

Question about 2001 Ram 1500 Truck 2WD

1 Answer

...temp gauge rising and check gauges light comes on in my dodge ram 1500-2001---137000 miles. I have to pull over to let it cool down. Any idea what the problem is--thanks Larry. do you have coolant in ...

gauge,if it does move then check the wires on the plug at the engine coolant temp sensor (ects) you can check the sensor by using a ohms meter by unpplugging it and check ohm's or resistance when cold

...temp gauge but never got hot. I brought truck to be repaired at different shops thinking maybe shop overlooked something. Is there something I should do or look for? By the way, if I tow a trailer or ...

Question about 1996 Ram 1500 Club Cab

1 Answer

...temp gauge on my 2008 ram 1500 jumps from normal temp to hot checked engine the temp is fine my heater them puts out cold air and I have no heat if I shut heater off and wait a few minutes temp gauge ...

Question about 2008 Ram Pickup 1500

1 Answer

...temp gauge goes from normal to high ,check gauge lite comes on in a few minutes temp gauge goes back to normal but heater will only blow cold air I,ll shut heater off wait a few minutes then ...

Question about 1995-1996 Dodge Ram 1500 Truck Fuel Injector for V8 5.2L V8 CNG 8t

1 Answer

gauges on cluster not working temp/volt gauges not working,changed ctsand the ct switch Did you check all your fuses? Even the ones that don't appear to have any relation.

temp gauge ,radio an interior lights don't work nor does the code reader to reset the engine light Its your over head dome livht fuse my obd scaner port was not connecting to my scan tool i checked my

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...