Questions & Answers for: tell cv joint needs replaced

...CV joints are worn out. you should have them looked at soon. If they need replacing, don't be alarmed when they tell you to replace the whole shaft. This is common as it is sometimes cheaper to ...

Ad

...tell if cv joint needs replaced was wondering if the joint itself should be solid or should it wiggle and if it was loose would it cause clanking sounds when driving If you are hearing a clanking ...

Ad

...CV joints greased) they can be saved.. If it has been too long - the joint will need to be replaed too.. Hope this helps !! Please rate me good ;o) It could very well be the wheel bearings, but wheel ...

...tell you what Idid. The rubber boot surrounding the CV Joint on my 95 GC Ltdwith 5.2L engine was ripped badly and I took it in to be serviced at mytrusted mechanic. The Napa parts guy that he buys ...

CV Joints. When there is play in the joints you get that thunk sound when you accelerate. The reason it doesn't repeat for a bit is because you have jammed the joint. Take it back to the dealer if you

Question about Motor 1998 Sonata

1 Answer

...has C-clips inside the boot they must be released befor the boot will come apart. It would be very hard to tell you how to do it on this page. You really need a repair manual on how to fix

Question about 2002 Grand Prix

1 Answer

...tell if the cv joint is gone Usually there will be a loud clicking when you turn the wheel from the side that the CV is worn. Lift the car up and you will see the drive axle going to the transmission ...

Question about 2000 Windstar

1 Answer

...CV joint you will be removing (Constant Volecity) (Knuckles?). This is a big job requiring special tools. If it is your bearing that requires replacement, the CV joint is not really involved in this. ...

...cv joint in one of your axles.depending on which side its coming from,tells you which cv joint is bad.drivers side front?pop and crack? it's bad.passengers side,pop and crack while turning the ...

...tell more from underneath with someone turning the wheel as you watch the CV Joint housing to make sure it's moving at the same time on both ends.  If one end of the shaft moves, the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...