Questions & Answers for: tell converter bad 2001 ford

2001 ford windstar amber warning light is on. It looks like a horseshoe thats flat on the bottom w/a exclaimation point in the middle. i get the engine light on with code p1538 on ford windstar ...

...2001 Ford Windstar makes a pinging noise when I take off from stop. Could this be the transmission? pinging noise low octane. mix gasoline half and half.half 87 and half 89.run it severals days if it ...

...into gear and this only happens when I get off the highway. The "Check Transmission" light came on and the O/D light started flashing. Transmission torque converter gone bad* Need new

...tell if a relay switch is bad? Thanks We had the same problem but when we put in a new fuse it smoked. It turned out to be something with the master cylinder and required the changing of a 20 dollar ...

...2001 Ford Windstar. It looks like a lightbult with an exclamation point in it. Now sure what it is. It also at times feels like i am driving on those rumble strips. If I let off the gas a little, it ...

...2001 windstar this showed a code miss fire #3 cyl changed plugs/wires then the guy who is doing the work told me it was the cat converters so he replaced them and it still has a miss fire and runs ...

need to know how many oxygen sensors there are in a 2001 ford windstar 2 sensors, bank 1 and bank 2, they are before the catalytic converter

...it do anything? These are common for the torque converters going bad. You can tell if this happens, it won't do anything, forward and backward, also when you check the fluid, it will read

...tell me what's wrong with it. It could be the torque converter or a sticking valve. Try some tranX in it. This is a seal conditioer. This will help with the valve. I have a 2001 windstar that ...

...that everything is perfectly fine and when i cover the exsoust pipe it escapes air from the and it looses pow 1998 ford windstar 3.0L it sounds like your converter or converters are pluged