Questions & Answers for: television mount wide studs

...first is to use another location. The second one is to take out the section of drywall and put horizontal braces between wall studs where you want to mount the tv. Sorry there isn't a simple

...television...would it be secure enough and what bracket would you recommend if I wanted tilt and swivel. thanks 12 inches is the minimum for mounting the unit to the wall. I mounted a 42 inch LCD ...

television mount My tv mount is 33.5 inches wide and my wall studs are 44 inches apart. Can I (or how do I) hang my television safely? Attach finished 1x4s to the two studs. Attach telelvision bracket

...mount my 50" plasma screen to wall. My mounting kit suggests 3 studs, I only have access to 2, is that going to be ok? Yes, 2 studs is fine. You might want to goto Home Depot or Lowes and pick a bag ...

...mount the LCD screen. Think about how much room you may want on that wall, especially if you plan on mounting speakers, too. You could hang a poster or picture relative to the size of the television ...

wide stud, mount a 6X6" piece of 1/2 plywood through your wall to the stud, using at least 4 #10 deck screws...it may be overkill, but it will be secure... my personal saying is, "If I can't hang from

...mount your television. Because wall mountingan HDTV is more of a permanent solution, careful planning is needed whenintegrating the television into your home design. Furniture placement, overall ...

...wide glide 96 ci You need two nuts that match the thread on the stud.. you thread the stud in far as you can by hand then the two nuts thread them both on to the stud till just just enough to be ...

...mount which will suppport the TV are in the middle of the studs. you can get a cheap stud finder at home depot from under $10.00.  It's usually only four bolts to screw into the studs ...

...Mount a Plasma TV? For mounting your TV on a stud wall follow the next few steps. 1. Locate the wall studs in the wall you wish to hang the TV on. 2. When you find the center of a stud, mark it with ...