Questions & Answers for: technics reciever fan working

...Reciever requires a service. And at that time, please ask the technician to replace all the Power supply Filter Capacitors, as well as the Output Audio amplifiers ICs Capasitors.With time, the ...

...fan so it runs whenever the unit is on. I had the reciever set for low impedance, when I turned this off all works fine. (Low impedance is only for speakers with an impedance of 6 to 8 homs or

Technics SA-DA10 jumps into overload after 10 minutes I turn the reciever on without speakers and volume zero then after 10 min he jumps into overload . I notised that the fan starts to turn when the ...

Technics SA-GX303 AV Controller Stereo Receiver stopped putting out sound. I heard a pop, saw a little smoke and smelled the smell of burned electronics. It appears that the receiver still works (i.e.

...reciever but the same thing happens. Any ideas? I have never serviced an mx-42, but what you describe is a very typical thermal failure of an audio output semi-conductor All semi-conductors contain ...

fan works fine. I have pulled-out the lighting unit (part no. 85112-03) because I presume some component in this device blew-out. Where can I get replacement or is there something else I should check?

...reciever that doesn't work i.e doesn't get reception Possible there are DRY SOLDER JOINTS within the main board and so when the set heats up there is a connection loss which makes the set switch off. ...