Questions & Answers for: technics mk2 switch

...mk2 it turns on but the turntable wont spin.. anyone know what it could be .. i replaced the start stop button, also the regulators still nothing please help thanks need to know if it powers up. Does ...

technics 1200 mk2 turntable hesitates when turned on. sometimes the 33rpm and the 45rpm will light up at the same time and the turntable will go very fast . some time the light on the on and off ...

technics 1210 mk2 problem with pitch and lights my technics 1210 mk2 turntables pop up light is constantly on even when down,the on/off red light and the pop up light both seem to flicker slightly ...

Technics sl 1210 MK2 does not start Hi. I opened my mk2 to be able to fix the "groundcable" which was teared out. There i saw that the whole ground gum was full of some kind of dried fluid. Probably ...

technics sl 1210 will not start up Help! i have power going to my 1210 mk2,but when you press the start/stop button the platter does not spin. When you press the button initially there is the ...

...mk2 technics 1200 any I aquired a second hand turn table and the power switch was missing. Can I replace with a spare part? Where can I get these? yah ofcourse you replace a new one at ...

technics sl1210 mk2 which is about 2 years old. hi ,,,the pitch control is good dont chance it ..you have a problem on the main board ...of your turntable...check the cold solder of your main board of

...knob, look here :- ...

...Technics Tried replacing the RCA cable inside the turntable but when trying to play a vinyl the power cuts out, resulting in having to replace the F1 (250mA) fuse. Any suggestions?  ability to ...

Technics sl1200 mk2 platter movings back and forth when I hold it, light on the switch blinks and the lamp wont completely turn off, platter spins with no pitch control at all, what to do? Bought this