...switch mode power supply causing a short to ground. If you are technical enough. Remove power remove cover and do a continuity test on the transistors on the heatsink. non of them should read zero ...
...Amplifier. Over a period of time these El Caps dry out, and cause headaches. Even tho you have replaced the fan it will not cool the system down in time if it is your amp that has gone. This heats up ...
technics SA-AX720 AMP WHEN I TURN IT ON IT JUST SATS OVERLOAD IF I PRESS ANYTHING IT SAYS SWITCH OFF POWER The audio amplifier IC of your device are damaged you need to replace it.
...power The overload indication tells us that there is a problem in the final stage of the amplifier section. This model uses an AMP-PAC or large amplifier IC (part number RSN-3305) which is now ...
...amplifier a30. model No. sa-a30u is an old amp and when i turn it on - most of the times - the light turns on but after a second turns back off, so it doesn't work. i have to try like 3 times for it ...
...power switch for a Technics SU-V78 amplifier . Where can I order one. The Panasonic part number is: ESB8249V This part is listed as no longer available from Panasonic, but I believe that it is ...
Technics SE-A 2000. Powers up but current protection switch cuts in and shuts amp down. this occurrs whether speakers are connected or not. It is not so easy to probe into to find a protection fault ...
Question about SUV500 2-Channel Amplifier
Amplifier with a problem. Overall, it works fine except for a speaker issue. When turned on, the Left speaker output on the monitor is lit up from 0 to 120. Just below, the Right speaker output on the
Question about SUV500 2-Channel Amplifier
...Amplifier that won't stay on....the power button doesn't stay pushed in. When I hold it in, it works but the button makes a crackle sound. I have a Technics SU-V460 Integrated Amplifier that ...
Question about Technics Stereo Integrated Amplifier Su-z780
...stack stereo from the 80's. When I turn the power on the switch does not stay on. I tried using tape and it works for a little while. Can I replace the on/ off button? Maybe Panasonic can advise ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions