Questions & Answers for: teac protect mode

...TEAC AG-7D amp but I'm hoping the problem might be a generic one. When I turn it on, it automatically turns itself off a few seconds later. I have disconnected everything and this still happens. Can ...

...protect mode my teac amplifier has gone into protect mode wat do i need to do to get it out of protect mode can u reset it or do i need to buy a new part There is a problem with one or both of the ...

Teac Problem After watching TV for a short while, popping noise and receiver goes into protection mode. Turn off, and it works fine for a short while and then same thing happens usually high b+ rail ...

...protect mode because it overheated. I just tried finding a Teac replacement fan and didn't see one on the web. My solution will be to adapt a small computer-type fan onto it to keep things cool. It ...

...PROTECT through the LCD reader. I unplugged it and all of the speakers and plugged them back in. It's still in the PROTECT mode. What could be the problem? how many speakers have you got on to ...

protect mode when all speakers are attached amp goes to protect mode The most common cause of this is that one of the speaker voice coils is shorted or the wiring to one of the speakers is ...

...teac ag-790a 'protect' error message on display. When I brought it to the audio shop for repair it worked fine; at home again the same problem? What is the problem? Tx. When turning the ...

...TEAC AG-980 on and now it will not switch on. The standby light is on which rules out the fuse. When I press standby either on the remote or on the unit itself it appears to switch on (display shows ...

teac ag-d9260 protect protect mode Just remove relay near 220v connection, open it, clean and reinstall

Protect on LED I have a TEAC NP-H750 Amplifier which recently started turning off automatically 3 min after being turned on. Just before it goes off, the message "BCO PROTECT" flashes on the LED. TEAC