Questions & Answers for: te lamp light comes turn

lamp turns off and thegreen light starts flashing. Then after a few minutes, it comes backon, only to keep repeating the same cycle. The manual says it's becausethe projector can't find any inputs! It

...lamp in- projector fans dont run and green light comes on for an instant then back to orange lamp gets brighter & brighte within a minute & immidiately color wheel stops rotating & projector goes to ...

...light turns red. Whats wrong? hi replace or clean the Air filters. Run the lamp reset command if you have.if not solved then check ballast unit which ignites the lamp. try this also, press the ...

...light above the "alarm" label. i opened it up and there is a lamp inside. 1. should the fan come on if the bulb is bad? 2. is there a way to test the projector without buying a new bulb? 3. is the ...

...lamp light led light is lit. The buld has about 200 hours. Hi, When the lamps are replaced, you need to ensure you have screwed the lamp assembly into the cavity tightly. The lamp assembly presses ...

...light doesn't even come on. If i need a new power supply, where do I get it? if you take the lamp door off, pay attention to the "peg" on the lamp door to see where it depresses the safety switch. if ...

...light when i plug it in.when i turn it on it turns on then right back off. What might this be? basic trouble shooting. before i tear into it. thanks I'm not where I can consult my tech notes but you ...

light warning still flashes check the lamp ballast any questions, feel free to contact me We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply

lamp timer on proxima dp9250+ 1,Turn the projector on,press the Menu botton 2,Press the Left ,Right,Up or Down to find the "lamp usage" and the reset option. 3,select "Lamp replacement counter Reset ?

...light and then after a period of times which varies will turn off on its own. We just put in a new lamp about 10 months ago and it has also been vacuumed within the last 3 months. I hear the fan turn ...