Questions & Answers for: tappets grand cherokee

...grand cherokee when we start the vechile i hear a ticking sound when it runs also when we turn the stering wheel i hear like knocking ???? wut can be the problem?? could be hydraulic tappet ...

...Grand Cherokee 5.9L, and recently, the vehicle has developed a tapping sound in the front passenger dash near the A/C vent. It began as just an ocassional tapping, and then became more frequent, ...

...Grand Cherokee Laredo 4.0 L. My valve tapet starts to knock when vehicle running reaches 1500 rpm. I have replaced rotor, distributor cap, plugs, high-tension wire, temperature sensors and TPS. What ...

hi .i would like to know what the headbolt and tappet settings are for 2.5 cherokee jeep preg. many thanks al head bolts are 110 lbs except 8 which is 100(right front) front to back #s are, Right side

...Grand Cherokee 4.7 engine. This past Sunday I started it up and it was really loud, then there was this ticking/tapping noise. It sounds awful when you drive off but after a couple of minutes, the ...

...grand cherokee and it is making a tapping noise in the engine. when parked we can here it. We havnt ran it out of oil/ but people have asked if it had any. has only been doing this about a month. ...

...grand cherokee laredo oil leaking if i let the jeep warm up 10-15mins before i move, the leak is not quite as bad when i let the oil psi come to 40 psi or just below, but if i take off before that, ...

...grand Cherokee Laredo 8 cylinder engine and it just started making a tapping noise when it's running. The oil hasn't been changed in awhile. Could this make a difference or any other ideas? yes it ...

...It happens only when starting up and sometimes I can now hear it when I am driving. hydraulic tappets are ...

...grand cherokee 5.2 liter its in the FSM. want to read that for free. see chapter marked ENGINE> chapter 9 ZJ jeep it is. there is no such thing, sorry here ill paste the install push rods/rockers. ...