Questions & Answers for: tape measure blade replacement

...tape measure to far it will uncoil the spring and you will either need a replacement refill or just get rid of it and ask Santa for a new one. I have used broken tape blades for "measuring sticks". ...

...tape measure or yard stick. Make sure you lookup the correct wiper blades in the application guide at the store or online (you can google 'lookup wiper size' or something like that). When you use the ...

...measure yours with a tape measure. I believe this is either 16 or 17" on the 2004. The old rubber strip will pull out from one end and the new one will slide right in, in its place,in about 2 ...

...tape measure Did it break and go flying up inside there? Take it back where you bought it, tell them you want a new one, they will replace it, all Stanley tools are warranted, the dealer may not want ...

what size wiper blades do i use use a tape measure to check the size and you can get replacements at any auto parts stores.or take your car there and most will come outside to measure it for you.

...it sounds like the right hand side of the deck is too high causing the high spots. move the mower to a flat surface, drop the deck to its lowest point and measure the deck height with a tape

how to replace a lufkin tape are you looking to replace the tape blade, or purchase a new tape measure all together ?

What is the length of the blade? If you are replacing the blade just use a tape measure around the two wheels. This will give you the measurement you need. GOOD LUCK FRIEND.

...tape measure and measure the distance around the wheels ( as it if is a band) and that will be the length and then measure the width of the wheels and that will be the width of the band make the ...

...measure tape. There may be a setting or a section that you bent some how. Check your blades to see if they are installed properly or even bent. I had a steel rod on one side I had bent and needed to ...