Questions & Answers for: tape load unload

TAPE WON'T LOAD My VCR side works perfectly, but when I attempt to load a mini DV tape, the tape goes into the machine, rests on the head for a couple of seconds and then is ejected. I removed the top

tape comes right out when u load it. could be a sensor problem. look at bottom side of videotape. in the center towards the top is a round hole, above a screw. then insode the vcr (take top cover off)

Auto off Unloading Lock I do not achieve that my chamber(camera) panasonic dvx100 expels the tape When the movement of mechanical position does not completed to move unloading direction within regular

The VHS will not load a tape. It is almost like the mechanism that loads and unloads the tapes is not functioning. Does anyone have a solution? Check for worn belt

whats the life span of an ultrium 2 tape?? 15 to 30 years archival 5000 cartridge loads/unloads Approximately 260 full file passes. (One file pass is equal to writing enough data to fill an entire ...

...tape jam inside.u need to turn over the camera.there is MD lid remove it 1 Remove the power supply (Battery and AC power adaptor). 2 Open the cassette lid. 3 Supply +4.5V between the LM UNLOAD ...

...unload direction. Usually(not always) happens with a going bad VCR tape on the rewind. Tape is becoming too difficult to rewind and/or VCR is getting tired. Eject tape. Discard tape as soon as ...

VHS portion not loading or unloading tapes The unit powers on but the VHS portion has lost power - will not load tapes. Any suggestions? Yes! it may be the loading basket problem, or the ...

tape is stuck in vcr Someone will have to take it apart---usually it is a problem with the mechanism that loads/unloads the tape or the transport mechanism that moves the tape---the latter winds the ...

Zenith VR4206HF VCR Very Slowly Loads/Unloads Tape My Zenith VR4206HF VCR has a couple problems. First, When you plug it in, the head drum spins and it tries to take in a tape that isn't there, but ...