Questions & Answers for: tail light housing wiring 1995

Tail light failure Replaced tail light bulbs, replaced fuses, but lights will not work. Related (License illunination bulbs do not work.)? All other lights work OK. Someone suggested replacing the ...

Can you replace the bearing on the A/C clutch on a 1995 Nissian Pickup, 2.4. Auto. you can but it is better to get a complete clutch or a rebuilt unit

...tail light and dash lights; 1995 Nissan pickup My brother-in-law has the truck and was pulled over for having tail lights out. He says the lights flicker and so do the dash lights. Since he doesn't ...

the tail lights and dashboard instruments have quit working.any suggestions . i replaced the combination switch, but it didn't help Try checking for a blown fuse in the fuse box. I'm having the same ...

...1995 nissan pick up/ I have a 4 wire harness? regards I suspect that the 4 wire harness includes a ground, so you may not be able to connect both brake lights and turn signals, which are separate ...

How do I replace the brake light bulbs in my 1995 Nissan pickup? well im guessing if you open your tail gate, there should be two srews that hold the light in place,

...tail light housing off from a nissian versa 07 i have found two studs with the nuts but there seems to be one more nut holding it on and i cant get the big platstic cover off to get a better look at ...

...next? dash lights, tail lights, park lights and plate lights do share the same source of power for pickups. try to replace your dash light and tail light bulbs, it would probably solve your

...If the lights are off the tail lights work perfectly fine could this be a brake light switch or am I going to have to look for a problem in the wiring ? plastic tail light housings? Headlight ...

...(c) brake/turn The truck lights grounded through the housing. All you need to do is run the ground wire to the chassis and the bright wire to the brake lead and the dim wire to the tail light