Questions & Answers for: Chrysler LeBaron switch

Ad

Question about 1991 LeBaron

1 Answer

leaking sensors or switches What are the proper description of the two switches or sensors on the front of a 1991 LeBaron 3.0 transmission? You'll have to get I.D. #'s of plate to identify your ...

Ad

Question about 1992 Lebaron

2 Answers

ignition switch 1992 Lebaron diagram to replace the ignition switch for a 1992 Lebaron Hello! Disconnect +battery cable...Remove tilt lever...Remove 3 Torx column cover attaching screws...Then the ...

Ad

How to replace a 1984 Chrysler Lebaron ignition switch the ignition switch is located under the dash on the steering column and is simple.... disconnect connector, remove to screws and replace switch ...

Question about 1991 LeBaron

1 Answer

window switches up-down in each door panel you will find up-down switches you will need to canefully remove each door panel to replace switch. you can do, i'm a girl and can do it myself.

headlights won't come on with switch but, will with turn on with turn signal and no tail lights fuses are all ok. does this car have a body modual for the lights and where is it located You might need

Question about 1992 Lebaron

2 Answers

Wiper motor will not turn off by switch. Fuse pulled is the only way to stop wipers from going constantly. Maybe your motor went bad. This sounds like more of a problem for an auto-electrician but i ...

i need the exact location of the break light switch on a 92 labaron 2.5 The brake light switch is mounted to the brake pedal bracket assembly, under the instrument panel. The stop lamp switch attached

Question about 1989 LeBaron

1 Answer

89 lebaron fuse power fuse 12 15 and 16 no powre change the electrical switch on the back of the ignition switch as these fuses are powered from the ignition switch

...beam only? This may be confusing, but here goes. If the car is a true 1990 it should have a combo switch that handles the turn signals, hazard, and wipers. Sometimes the dimmer switch is included ...

1993 Chrysler LeBaron Convertible with 6-way power seat. Switch only works to lower the seat. Removed the wiring plate and see 12V only on the center switch. No voltage on either of the outside ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...