...samurai that turns over,has good compression has been timed properily has fire to plugs gas to the carb but will not start Hi,you can try this , take your plugs off ,clean them good or replace ...
won't start Trudk turns over, but engine won't fire. Lots of fuel, fuel pump working, and has spark. Sounds like it wants to fire, but wont. Almost fires but won't? try and run compression tests on ...
...samurai 130 psi compression - is this ok my sammy has 130 psi motor compression - is this normal - Checked on this....you should be up in the 170 area. 199 is new and 170 is service. Make sure your ...
I have reason to believe my valves are bent. How do I check them The easiest way is to do a compression test. Install compression gauge into cylinder in place of the spark plug. Crank engine several ...
...suzuki samurai Distributor problems My friend borrowed my distributor from my samurai to help diagnose a problem with his...when he removed mine, he failed to mark the position of the rotor. When ...
what is the compression pressure on a1.3 liter suzuki samurai engine 9.50:1
...Samurai Suzuki seems to be guttless. I performed a compression test and the first cylinder tested at 75 and all the others tested at 60 I have checked the electrical system and everything seems to be ...
...Suzuki Samurai will not idle when hot.Idles perfectly when cold.It also backfires when running against compression. Welcome to FixYa.com Check for vacuum leaks with a can of carb cleaner-engine ...
...suzuki samurai is blowing oil out of exhaust Your compression is low, the rings in the piston engine are worn out , you will need an engine overhaul , probably you have low power also .And blue smoke ...
Question about 1988 Samurai
...suzuki samurai what should it read on the compression gage With throttle held wide open... A good running engine should produce 140-160lb compression the fsm answers that. and varies greatly by ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
